For Ford / Lincoln / Mercury 2001-2018 3-Btn RHK (CWTWB1U793)—BRK

  • Item #: 1935
    EZ #: FORD-R8070
    Model: BRK-RH-FOR-04
  • Manufacturer: BlueRocket


Designed for 2011+ models, but backwards compatible with previous years.

Works on the Following Models:
Ford Econoline 2004-2013
Ford Edge 2007-2015
Ford Escape 2005-2012
Ford Expedition 2003-2016
Ford Explorer 2001-2015
Ford Explorer ST 2001-2010
Ford F-150 2004-2014
Ford F-250 2004-2016
Ford F-350 2004-2016
Ford F-450 2011-2016
Ford F-550 2011-2016
Ford F-650 2011-2017
Ford F-750 2011-2017
Ford Five Hundred 2007-2011
Ford Flex 2009-2018
Ford Focus 2008-2011
Ford Freestar 2005-2007
Ford Freestyle 2005-2009
Ford Fusion 2006-2012
Ford Mustang 2011
Ford Ranger 2001-2011
Ford Taurus 2008-2009
Ford Taurus X 2008-2009
Ford Windstar 2001-2003
Lincoln MKS 2010
Lincoln MKX 2006-2013
Lincoln MKZ 2006-2013
Lincoln Mark LT 2011-2014
Lincoln Navigator 2014-2017
Mercury Mariner 2005-2010
Mercury Milan 2006-2010
Mercury Montego 2007
Mercury Monterey 2005-2007
Mercury Sable 2008-2010
Buttons: Lock
Compatible FCC ID: CWTWB1U793
Compatible IC: 1788A-FWB1U793
OEM Part #(s): 164-R8070, 5912560
Replaces: Rotunda 164-R8067
Rotunda 164-R8070
Rotunda 164-R8073
Strattec 5921186 (Ford Mustang)
Strattec 5912560 (Ford 3-Button)
Strattec 5915217 (Lincoln 3-Button)
Strattec 5915218 (Lincoln 4-Button)
Frequency: 315 MHz
Chip: Tex 4D-63 80-Bit
Battery: CR2032
Emergency Key: Included
Test Blade: H75
Reusable: Yes
Condition: Aftermarket New




WARNING:Please note that unlike the more expensive Strattec brand, the remote portion of all aftermarket Ford remote head keys such as this key does not program along with the chip using your diagnostic tool. Please program the buttons using the standard Ford on-board programming process, as follows:

  1. Turn any key in the ignition 6, 8, or 10 times until door locks cycle. (In later models you will hear a chime rather than door locks cycle)
  2. Within 20 seconds press any button on the remote(s) you are programming, locks will again cycle to confirm remote was programmed.
  3. Turn ignition to off postion. Locks will cycle one last time confirming car has exited programming mode. Test remote(s).

IMPORTANT NOTE: If you have trouble getting your vehicle to enter programming mode try buckling the driver and passenger-side seatbelts.


Not for nothing, but I had a locksmith customer tell me that the above procedure did not work on his 2015 Escape but how he got the job done was the following...

First he used his MVP to get the chip programmed to the car and get the car started. Then he shutdown the car and buckled the seatbelt and made sure the door was closed before starting the procedure of adding the remote function. He put the key into the ignition, turned the car on, pressed a button on the remote, the door locks cycled to show it was in program mode, then the car took the remote. This procedure may help you.

Do you have a tip that might help others? Please Contact Us.


Customers Who Bought This Also Bought