AVDI - Vehicle Diagnostic Interface (Abrites)—2024 SPRING PROMO
$1,150.00
$999.00
Description
Spring promotion valid through April 28, 2024—Purchase the AVDI for $999!
30 day refund on defective hardware
ALL SOFTWARE SALES ARE FINAL
DROPSHIP ONLY, additional fees may apply.
DROPSHIP ONLY, additional fees may apply.
The ABRITES Vehicle Diagnostics Interface (AVDI) is the latest version of ABRITES's interface that allows the connection between their state-of-the-art software and your vehicles. The AVDI is the basis upon which the whole ABRITES products ecosystem is founded. On this basis, you can build a bespoke package of solutions tailored to your needs. The basic package will give you access to a vast array of functionalities that will allow you to enter the world of automotive diagnostics with a minimal investment. Additional purchases will allow you to cover a range of functionalities that is often unmatched by OEM tools.
Each AVDI includes an Annual Maintenance Subscription (AMS) for the first year of use in order to make sure that you get the full AVDI experience straight away. The AMS allows you to receive the latest updates on the AVDI diagnostic software.
Furthermore, you will be able to perform basic diagnostics on all supported brands—Audi, Volkswagen, SEAT, Skoda, Bentley, Lamborghini, BMW, MINI, Rolls Royce, Renault, Dacia, Mercedes-Benz, SMART, Mitsubishi, GM, Peugeot, Citroen, Opel/Vauxhall, Porsche, Honda, Ford, Mazda, Jaguar, Land Rover, Toyota, Lexus, Volvo, FIAT, Alfa Romeo, Lancia, Jeep, Subaru, Nissan, Infiniti, Chrysler, Dodge, Kia, Hyundai, Suzuki, Daihatsu, DAF, Aprilia, BMW, Bombardier Recreational Products and others.
The basic diagnostics that can be performed on all brands listed above are as follows:
- Complete vehicle scan
- Module identification – see all modules in the vehicle, complete with VIN and part numbers (where applicable)
- Reading and clearing diagnostic trouble codes (DTCs)
- Live data display – see live data from the sensors in the vehicle in real time
- Actuator testing – identify any possible issues in the car by performing actuator tests
What’s more, all owners of AVDI receive the PassThru driver, which is an invaluable tool allowing you to work with original equipment manufacturer software (OEM) when necessary, as well as a vast array of special functions allowing you to get the full experience of ABRITES's products straight away. You can find details of those by brand listed below.
The J2534 PassThru driver is compatible with the international SAE standards and emulates different interface units in order to access 3rd party software products. This means that you can access original equipment manufacturer products and work with them via AVDI, no need for additional tools. It saves time and expenses, leaving you and your customers happy.
PASSTHRU COMPATIBILITY
- BMW - DIS over K-line and CAN bus
- BMW - E-Sys, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus
- BMW Rheingold ISTA-P
- BMW
- MINI
- Bombardier diagnostic software
- Mercedes DAS/Xentry - Star Diagnosis
- Mercedes
- Evinrude Diagnostics
- Fiat EXAMINER
- FCA
- Ford Scanner
- FORD
- GM - Tech2Win, GDS2 and SPS diagnostic software
- GM
- Honda/Acura HDS
- HONDA
- Hyundai/KIA GDS
- HYUNDAI
- KIA
- Jaguar Land Rover Symptom Driven Diagnostics (JLR SDD)
- JAGUAR
- LAND ROVER
- Mitsubishi MUT3
- Nissan Consult III+
- NISSAN
- Land Rover/Jaguar IDS
- Subaru Select Monitor III
- SUBARU
- Suzuki/Yamaha Marine Diagnostics
- Toyota/Lexus/Scion Techstream
- TOYOTA
- LEXUS
- Volvo VIDA
- VOLVO
- VW/Audi/Seat/Skoda/Bentley/Lamborghini ODIS
- VW
- AUDI
- SKODA
- SEAT
- BENTLEY
- LAMBORGHINI
- Webasto TT
- VCI emulator which enables AVDI to emulate different interface units (e.g. K-line interface and ELM327 interface)
VAG
- Complete vehicle diagnostic scan
- Read and clear diagnostic trouble codes (DTC)
- Display live values from the modules of the vehicle
- Perform Input/Output actuator tests
- Enable and disable actuators
- Access and perform Basic Settings
- Calibrations (e.g., steering angle calibration)
- Scan all units or separate ones, access scan reports in a printable format
- Diagnostic channel adaptations
- Key programming by channel if the PIN is known
- Guided functions for ECU, Instrument cluster, Navigation, Steering wheel, Electronic parking brake, Telephone, Comfort module and Body Control Module
- Enable video in motion for MMI 2G and 3G
- Steering lock adaptation
- 7-digit to 4-digit PIN conversion
- DPF remove by DUMP – EDC16 (checksum needed), EDC17
- Key programming, mileage calibration and module replacement in VAG Immo III and III+ vehicles
BMW
- Reading and clearing DTCs
- Full guide during the DTC procedures
- Live data monitoring from multiple modules at the same time with multiple actuator activation
- Actuator testing for all electronic modules
- Generate/save/write complete Vehicle Order
- Key learning if required security data (ISN) is present (ZN002 PROTAG is required)
- Disable transport mode
- Change DME/DDE ISN
- Disable/enable keys
-
Guided functions:
- Entering and exiting transport mode
- Service interval reset
- DPF Replacement
- DPF Regeneration
- Reset FRM short circuit
- Smooth running DME/ DDE setup
- EGS adaptation reset for ZF 8HP and 6HP
- Enabling parking brake workshop mode
- Injector calibration
- Starting torque adjustment
RENAULT/DACIA
- Reading and clearing of diagnostic trouble codes (DTCs)
- Displaying of actual values (either numerically or graphically)
- Actuator testing - ALL actuators can be tested separately
- Advanced – view and edit various configuration parameters
- Scan report
- Key programming for all vehicles up to 2014 (including Clio IV)
- Key programming for the SMART 453 / Renault Twingo III
- Module adaptation by VIN change
- Change Radio code
- Scan report
-
Advanced diagnostics – up to x95 (off line); up to Clio5 (on line)
- Factory level coding
- Change language
- Dongle reset
- And many more
MERCEDES-BENZ/MAYBACH/SMART
- Read and clear diagnostic trouble codes (DTCs)
- Monitor live values
- Perform actuator tests
- SCN coding (e.g., DPF regeneration)
- Service interval resets both for Assyst and Assyst Plus for most current models.
- Vehicle identification
- Module scanning
- Custom session
Smart
- SOFTOUCH activation - switching from semi-automatic to automatic transmission
- Key programming – models 450, 451, 452, 454 (All Keys Lost and duplicate key programming)
- Key programming for the SMART 453 / Renault Twingo III (Duplicate key programming for SMART 453 and Twingo III. The process in the basic package is slower and different than the one in the RR019 license. With RR019, you can perform all keys lost and duplicate key programming, which is much faster than the one procedure in the basic package.)
- Emergency start – models 451, 454
- Mileage calibration – both SAM module and instrument cluster
- Gearbox adaptation
- Cruise control activation
- Reflashing and renewal of SAM module and SAM/ECM synchronization
Mercedes-Benz
- Key programming by dump (DAS 2/2a/2b/ DAS 3)
- Cluster calibration and adaptation for vehicles up to 2014
- SCN coding completely by OBDII (no Xentry online account is required)
-
CPC modifications by OBDII:
- VMAX limiter removal
- Exhaust flaps adjustment
- Torque limiter adjustment
- SBC counter reset
- Enable Video in Motion
- Clear crash data from Bosch/Temic/TRW airbags up to 2010
MERCEDES-BENZ TRUCK RANGE
- Module scanning
- Module identification
- Reading and clearing diagnostic fault codes
- Live data monitoring
MITSUBISHI
- Reading identification data
- Reading and clearing fault codes DTCs (description of DTCs is available in multiple languages)
- Scanning for available control units
- Coding and adaptations
- Displaying actual values (measured parameters)
- Reading and programming flash Engine Control Units and output tests.
- The following functionalities are also included in the online version of the software:
- Full module identification
- Connecting to the electronic modules
- Reading of EDC15 engine control units (ECU)
PSA
- Reading and clearing of Diagnostic Trouble Codes (DTCs)
- Live values monitoring from all electronic modules and sensors using graph and table view
- Actuator testing
- Module identification
- Change ID in BSI, Telematics, Airbag, MDS
- Clear crash data in some Airbag modules by DUMP (offline)
- Change VIN in the BSI (does not include 2015+ Continental and 2016+ Delphi BSIs), Telematic/Radio, Airbag
- Change PIN in the BSI and make the BSI virgin (current PIN must be known)
- Key learning to all models if the PIN is known
- Change Mode (customer/showroom) BSI 2015+
- BSI backup/restore all config
- BSI view/clear faults log (via ABRITES Diagnostics for PSA offline) and history logs
- BSI service reset (via ABRITES Diagnostics for PSA offline)
- Set PIN ELV in BSI (via ABRITES Diagnostics for PSA offline)
- Verify/Set PIN in the Hands Free module in the BSI (via ABRITES Diagnostics for PSA offline)
- Emergency start if the PIN is known for vehicles with mechanical key (via ABRITES Diagnostics for PSA offline)
PORSCHE
- Module identification
- Read/Clear DTCs
- Live data display
- Actuator testing
- Coding options
- Adaptation channels
HONDA
- Module scanning - information on DTCs, Live Data (if available) and extended module identification
- Vehicle identification - automatic vehicle model detection
- Reading and clearing diagnostic trouble codes - shown in each module
- Spare key programming
- All Keys Lost
- For all vehicles up to 2022!
TOYOTA/LEXUS
- Module Identification
- Scanning for Diagnostic Trouble Codes (DTCs)
- Clearing DTCs
- Live Data monitoring
- Actuator tests
- Coding functions
- Electronic module special functions
- Key programming for all vehicles produced up to 2018 (G-type keys (mechanical and smart keys) and H-type keys (only smart keys)
- Key identification and cloning
- Reset and subsequent reuse of smart keys (ZN002 PROTAG is also required)
VOLVO
- Reading of identification data from all electronic control units
- Reading and clearing DTCs
- Display of actual values/live data
-
Service functions such as:
- Service reset
- Reset cylinder adaptations
- No speed limiter
- Change mode (normal, factory, transport, safety)
- And many more
- Read Central Car Configuration
CHRYSLER/DODGE/JEEP
- Reading and clearing of diagnostic trouble codes
- Module detection
- Module identification
- Extended ID
- Live data monitoring
- Actuator testing
- Scanning
- Read/write Data Flash and Program Flash for EDC15C2 and EDC16CP31 ECUs
KIA/HYUNDAI
- Full vehicle scan
- Module identification
- Reading and clearing of diagnostic trouble codes - with detailed information about the codes
- Live data display
- Actuator testing
- Read the PIN Code from EDC15 and Kefico ECUs by dump
- Instrument cluster calibration for instrument clusters with 93c56 EEPROM (2004-2008) - Accent, Veracruz, H-1…
FORD
- Reading and clearing of DTCs
- Module identification
- Extended module identification
- Service interval reset
- Actuator tests
- Measured values
- Airbag clear crash data and renew - RCM module with the following processor: XC23xx data flash for FORD/Mazda/JLR and Volvo, as well as TMS470 + EEPROM 25320/25640 for Ford/JLR
FIAT CHRYSLER AUTOMOBILES
- Scanning all electronic modules
- Reading and clearing diagnostic trouble codes
- Data display
- ECU-related procedures (identification and configuration)
- Actuator tests in order to show the source of the faults
- Key programming by OBDII
- Transponders/Keys preparation by dump of Immobiliser
- BCM – Read/Update ConfData by OBDII, PIN, component protection data
- For models up to 2012
JAGUAR AND LAND ROVER
- Module scanning
- Reading and clearing diagnostic trouble codes for all modules
- Service functions
- Spare key programming
- ALL KEYS LOST key programming
- Remote control and keyless programming
-
See supported models below:
- 2013-2014 Land Rover LR2
- 2012-2020 Land Rover LR4
- 2015-2018 Land Rover Discovery
- 2016-2018 Land Rover Discovery Sport
- 2011-2017 Land Rover Range Rover
- 2010-2018 Land Rover Range Rover Evoque
- 2011-2017 Land Rover Range Rover Sport
- 2017-2020 Land Rover Range Rover Velar
- 2014-2020 Jaguar F-Type
- 2011-2017 Jaguar XJ
- 2013-2018 Jaguar XF
- 2017-2020 Jaguar F-Pace
- 2017-2018 Jaguar XE
- Mileage calibration for models up to 2014
GENERAL MOTORS
- Reading identification of modules
- Reading/clearing fault codes
- Scanning for devices
- Data display
- Measured values
- Security code programming and vehicle identification number (VIN) programming
SUZUKI
- Module identification
- Reading and clearing diagnostic trouble codes
- Live data monitoring
- Actuator tests
SUBARU
- Scan for units
- Module identification
- Read and clear diagnostic trouble codes
- Temporary diagnostic codes display
- Memorized diagnostic codes display
- Current data display
- Clear crash data
- Monitor live data
TESLA
- Scan the vehicle for all available electronic modules
- Read and clear their respective DTCs (diagnostic trouble codes)
- View live data for them.
-
Service functions:
- Entering the parking brake in service mode
- IBST VIN learn and reset
- Test pedal offset
- Dim central, left or right mirrors
- Head Lamp communication test
- HOMELINK communication test
- Window calibration on all doors
- NFC amplitude reading and many more
FERRARI
The following functionalities are FREE for all users with AVDI and active AMS:
- Automatic PIN code extraction
- Key programming by OBDII
-
For these supported models with metal-bladed key:
- 612
- FF
- 599
- F12
- 458
- California
On top of all the free functionality, there are many options that can be purchased separately giving access to a wide range of opportunities for every professional. These functionalities are available as software special functions and include:
- Key programming – add a spare key or program keys in All Keys Lost situations
- Module replacement – perform parts exchange, module renewal, module adaptation
- PIN code reading – get information vital for key programming and module adaptation
- Component security bytes reading – read bytes in order to adapt modules and learn keys
- Cluster calibration – access the instrument cluster data
- Engine Control Unit (ECU) programming – update the software to apply custom settings
AVDI is unrivaled in giving you the opportunity to work with nearly 100% of the vehicles around the world and with OEM tools, as well. It is a tool unmatched in versatility, coverage and functionality. Get your AVDI now, and achieve the impossible!
Customers Who Bought This Also Bought
Mitsubishi MIT6-P / Mech PLASTIC HEAD Key (STRATTEC 692566)
$2.05
| Item #: | 2895 |
| EZ #: | MIT6 |
| Model: | STR-692566 |
$2.05
For GM Chevrolet GMC 5-Button Remote SHELL (M3N32337100) (BRK)
$12.00
| Item #: | 11768 |
| Model: | BRK-RMS-GM-04 |
Ford Mustang Mach-E 2021-2023 4-Btn Smart Key (M3N-A2C931423) (STRATTEC)
$152.85
| Item #: | 18512 |
| EZ #: | FORD-R8310 |
| Model: | STR-5942083 |
$152.85
