GT105 ECU Connector Plus GT107 DSG Gearbox Read/Write Adapter (GODIAG)

  • Item #: 18590
    Model: GDG-GT105-GT107
  • Manufacturer: GODIAG


GT105 ECU IMMO Prog AD Plus GT107 DSG Gearbox Data Read/Write Adapter

GODIAG GT107 ECU IMMO Kit is a DSG gearbox connection adapter. DSG Gearbox maintenance engineers can clone, diagnose and repair DSG Gearbox ECU, and read, write and adjust data for DSG Gearbox ECU via PCMFlash, PCMTuner, KESSv2, and more.
GODIAG GT107 DSG Gearbox adapter has automatic and manual selection for PCMFlash software. For data reading and writing, you can choose "Auto." For diagnosis you can choose "Manual." For use with KESSv2, DQ200, DQ250, DQ500 software, you can also choose "Manual."
Moreover, with the car battery power, GODIAG GT107 DSG Gearbox adapter can directly read and write DSG Gearbox data and you can clearly check the communication status during the data reading and writing process.
1. Read and write DSG Gearbox Data
2. Read and write DQ250, DQ200, VL381, VL300, DQ500, DL501 Gearbox TCU
3. Read and write DSG gearbox data with PCMTuner module 58/KESS v2/KTM bench/etc.
4. GT107 has Auto and Manual selection for PCMFlash software


  • A full-protocol ECU connection line for ECU programming power adjustment.
  • OBD2 independent PIN 4 body GND, PIN5 signal GND for special programming of some modules.
  • PIN4 and PIN5 can be switched between short-circuit and non-short-circuit.
  • Standard OBD2 independent PIN4, PIN5.
  • Pure copper female seat supports repeated insertion and removal, and has a long service life.
  • Battery clip treated with environmentally-friendly salt spray, with a thickness of 0.5mm.
  • The DC car battery cable adopts 0.75mm² 2-core sheathed cable, which supports DC5.5*2.5/ DC5.5*2.1 interface.
  • The DC connector has a resettable 7A fuse.
  • DC power interface, dedicated laboratory power connector.
  • OBD2 universal jumper of good quality.
GODIAG GT105 Gearbox Pinouts:
GT107 can be used to renew Mercedes 7G Gearbox, BMW 6HP EGS with CGDI/VVDI devices.
GT107 Mercedes 7G Gearbox Pinout

GT107 BMW EGS 6HP Pinout
Pin assignment at transmission plug - 6HP26 BMW with E-shift
Pin Assigned To: Notes:
1 Series line Availability line from stg. col. switch center
2 CAN L CAN low
3 ISO K K line (for example application)
4 not in use  
5 not in use  
6 CAN H CAN high
7 not in use  
8 not in use  
9 Terminal 15 Wake-up signal, terminal 15
10 P signal P line for starter inhibit
11 not in use  
12 not in use  
13 Terminal 31-1 Earth (ground)
14 Terminal 30 Permanent positive (EGS supply voltage)
15 not in use  
16 Terminal 31-2 Earth (ground) 2
GT107 can also be used to diagnose/renew Benz VGS (722.8), Benz 9GT (VGS-NAG3) gearbox, GM  GPIO 4L60E, Volvo Gearbox, BMW 7-dual-clutch (GETAG 7DCT) gearbox, BMW Temic DKG, ZF 8HP gearbox with proper devices.

GT107 VGS 722.7 (A168) Pinout
3. K line
5. CAN High
6. VCC 12+
7. GND -
8. CAN low

1. CAN-L
2. CAN-H
3. Mass GND-
4. 12V

GT107 Volvo Gearbox Pinout
GT107 Mercedes-Benz 9GT (VGS-NAG3) gearbox pinout
GT107 BMW 7-dual-clutch (GETAG 7DCT) gearbox Pinout
GT107 BMW Temic DKG Pinout
GT107 ZF8HP Gearbox Pinouts
GM GPIO 4L60E Pinout


  • 1x GT105 GODIAG ECU IMMO Prog AD
  • 1x GT107 DSG Adapter
  • 1x Power Cord with Battery Clip
  • 1x Probe

User Manual

Customers Who Bought This Also Bought