PN017 - Peugeot/Citroën BSI/Instrument Cluster Data Manager (Abrites)

$1,650.00 $1,320.00

Description

PN017 is a function dedicated to instrument cluster and BSI odometer data calibration in Peugeot and Citroën vehicles. With this function, you can read and calibrate mileage stored in the BSI module and remove synchronization with the instrument cluster. In cases where sync removal does not apply, it can calibrate milage in the cluster exclusively. Supports all CAN and UDS protocal models including almost all models produced after 2004. Support for Delphi UDS BSI 2016+ also included.

Supported Vehicles for Calibration:

1007
2008 2013+
207
208 2012+
3008
301 2012+
307 2005+
308
407
5008
508
607 2006+
807 2006+
C2
C3 2006+
C3 II
C4
C4 II
C4 Picasso
C5 2004+
C5 II 2007+
C6
C8 2007+
Citroen C3 2013
Citroen C3 2013
Citroen C3 Aircross 2013+
Citroen C3 Picasso 2013
Citroen C32016+
Citroen C4Picasso II2016+
Citroen Jumpy 2016+
Citroen Jumpy 2016+
Citroen Jumpy2017+
Citroën Berlingo 2008+
DS3
DS4
DS5
Expert II
Jumpy II
Lancia Phedra 2008+
Partner 2008+
Peugeot 3008 II
Peugeot 308 II2016+
Peugeot Expert 2016
Peugeot Expert2017+ C-Elysee 2012+
Toyota ProAce 2016+
Toyota ProAce 2016+
Toyota ProAce 2017+

The BSI Exchange allows you to read whole content of one BSI (i.e. JCI or Valeo CAN) and transfer it to another. Note: It's very important to use the same hardware type for the replacement BSI. Valeo BSIs are two types—the old type being thick, whereas the new one is thin. To use this function, you need PN017 & PN018 functions. The UDS BSI modules are supported via read/write EEPROM and flash functions.

New AVDI Interface or active AMS is required to purchase this special function.

Please enter AVDI# in the field on this page before adding to cart.
The normal turnaround time for software link processing is 1-2 business days.

*ALL SOFTWARE SALES ARE FINAL