Poker Pro AUTO Electronic Key Machine (ILCO)—Flat/Cruciform Keys

• Extremely simple operation. Only two buttons (Start & Stop) utilized to operate the machine.

• Four-sided clamps have an exclusive rotation system that facilitates the installation of a wide range of keys.

• Lightweight, portable, and compact design.

• Ergonomic grips below the machine body makes it easy to lift and transport.

• Features a laser reader ensuring the customer’s key is read precisely and the duplication is perfect.

• Tool accessory tray on top of machine for holding various accessories.

• Comes with a fixing bracket, the ideal solution for locksmiths working out of a van.

• Protective shield to ensure all shaving are kept inside the machines compartment.

• Enclosed cutting area makes it easy to keep work bench clean and orderly

• Removable chip swarf tray below the carriage.

 

Laser reader for quality cutting results
The Poker Pro features a laser reader ensuring the customer’s key is read precisely and the duplication is perfect. The lack of a tracer point means no contact with the machine, therefore protecting the customer’s original key.

 

Four-sided clamps

Four-sided clamps have an exclusive rotation system that facilitates the installation of a wide range of keys. Each clamp is equipped with a gauge for perfectly aligning the key.

 

Optimized cutter wear

Hardened metal cutter is resistant to wear and allows you to cut any side of a key in just one cycle. A specially designed control system regulates the carriage movement speed so that it is always proportioned to the strain the cutter is subject to. This means precise cuts, a perfectly deburred copy of the key and optimized usage of the cutter.

 

Visual and audible warnings

The machine features an intuitive system of led lights, flashes and beeps to notify procedure faults, such as presence of dirt on the optical reader, accidental opening of the shield while cutting, key not installed, etc. The push button panel allows you to stop and restart the cutting cycle at any moment.

 

Practical and ergonomic work station

Wide protective shield that slides inside the machine body. The enclosed cutting area makes it easy to keep the work bench clean and orderly. Metal chippings are collected in the swarf tray below the carriage. The tools needed on a daily basis are close to hand thanks to the practical accessories tray on top of the machine.

 

Safe for the user

The cutter and the carriage stop automatically when the safety shield is opened, ensuring the operator’s safety at all times.

 

Compact and easy to carry

Features a lightweight, portable, compact design. The ergonomic grip below the machine's body makes it easy to lift and transport. The machine comes with a fixing bracket, the ideal solution for locksmiths working out of a van.

 

TECHNICAL SPECIFICATIONS:

• Power Supply: Machine: 24V d.c.- 5,5 Amp. - 130W; Power pack: 90/264V a.c. - 50/60Hz - 220W MEANWELL GST220A24-R7B
• Cutter motor: 24V d.c.
• Cutter: U01W in hard metal with coating
• Cutter speed: 1860 rpm
• Clamps: rotating with four sides to perfectly secure keys, fitted both on the back or on the profile for keys with symmetrical cuts
• Movement: on 2 axes (with special bushes) driven by step motors (on rectified roller guides)
• Runs: X-axis: 30 mm, Y-axis: 5 4 mm
• Dimensions: width: 318 mm, depth: 413 mm, height: 340 mm
• Weight: 35.27 lbs